Strawberry ice vaping modes
Vape News

What Are The The Different Vaping Modes

A Guide To Advanced Vaping Modes in 2022

All you had to do to operate a basic cigalike device was insert the cartomizer into the battery area and inhale to vape. It couldn’t have gone any smoother.

Temperature control is routine these days, and new capabilities like as custom power curves, pulse mode, and a slew of others make it difficult to keep up. There are likely thousands of vapers with high-end mods who have no idea what these settings perform.

It’s important studying what these advanced vaping modes accomplish and why you might want to try them out if you want to get the most out of your mod.

Which Vape Mode Should I Use?

Advanced Vaping ModesIt might be overwhelming to find your way through all of the options available for your mod if you’re new to vaping or new to vaping with a multi-setting device.

So, to make things a little easier for you, we’ve broken down each option and when to use it so you can start vaping the way you want, faster. You’ll need to figure out what sort of wire your coils are composed of before looking at the settings. For the best results, you should use the option that corresponds to that material.

Wattages that have been pre-set

Preset wattages are essentially a way of saving your most frequently used settings for later retrieval. For example, you may want to vape at 60W with a sub-ohm tank, 25W with a Mouth-to-Lung device, and 50W with a rebuildable. Of course, you can make the changes manually every time you change atomizers, but if you have three preset wattages, you can cycle between them in a matter of seconds.

Depending on the device, this mode may have a different name. On many devices, this is referred to as “memory mode” or something similar. In most cases, there will be at least three places to remember your preferences, although some devices have up to five. It’s really simple to set things up; all you have to do is dial in the desired setting and you’re ready to go.

Power curves made to order

Custom power curves, like as those found on the Aspire Finnix mod, allow you to change the wattage you’re vaping at throughout each puff. For example, your gadget may be set at 40W, but with a unique power curve, it could start at 50W, then reduce to 45W after a second, 40W after two, and finally 35W for any puff lasting more than four seconds.

Of course, the purpose of these modes is that you get to determine how your device’s output fluctuates, so you can set it up whatever you like. You can usually do this on the device itself, but some modifications come with computer tools or apps that make it easier to make the adjustments. It may take some time to get things set up the way you want them, but if you want a surge at the start of your draw or a progressive increase throughout, it’s well worth the effort.

Mode of bypass

Because it removes the primary feature of variable wattage, bypass mode is one of the easiest “advanced” vape settings.

You effectively bypass the mod’s functionality, causing it to behave more like a mechanical mod, supplying power dependent on the remaining battery life and the resistance of the coil you’re using. This implies that while the battery or batteries are fully charged, your effective wattage will be higher, and as you vape throughout the day, it will be lower.

Pulse mode is an option

Pulse mode isn’t the most frequent vape mode, however it’s available on the Vaporesso Gen S in particular. Essentially, the mode changes the rather steady output of most gadgets by pulsing the output every 0.2 seconds as long as you hold down the fire button.The goal is to maintain the device’s performance steady throughout your pull, with the pulsating output generating a harder-hitting vape.

It’s questionable if this has any advantages over simply having a constant output on the device, but the pulsing is so fast that you’re unlikely to detect a drop off, and vapers have usually responded well to this mode.

Mode for super players

Another Vaporesso specialty is Super Player mode (available with the Swag II), which lets you to utilise coils with a broader range of resistances than the device normally permits, down to 0.03 (and up to 5) with the Omni Board 4.0. (and up to the more recent V 4.2).

If you make your own coils, this is a fantastic feature since, while you’re unlikely to find a pre-made coil with such a low resistance, you could build one yourself that you can’t use due of the hard-coded constraints on regulated devices.

There’s a reason for these limitations, so if you’re using it towards the lower end of the resistance range, double-check that you’re running within the battery’s safe operating limits. You can do this with a variety of tools, but Steam Engine is particularly user-friendly and effective.Materials to be used

Because not all vaping coils are made of kanthal, having a material selection option on your mod is essential if you’re going to use TC mode. Nickel (Ni200), titanium (Ti), and stainless steel (SS) are the most popular coil materials for TC vaping, and your mod needs to know which one you’re using to perform properly in TC mode.

So a material selection mode tells the mod what you’re vaping with, and it’s generally incorporated into the TC mode, so you either pick your material before going into the main mode, or there are three different TC modes, one for each material.

However, this is pretty much a must-have for a TC mod, and you’d be hard pushed to find one that doesn’t let you choose your material.

Temperature regulation

Temperature control (TC) vaping is essentially temperature limiting, in that you specify a maximum temperature for your coil and the device makes sure it stays within that range. This means modifications can avoid “dry hits,” and even if you fire your device with practically nothing in the tank, your juice won’t “overcook” or the coil’s cotton won’t be burned. It provides more consistent performance in everyday operation since it smooths out temperature spikes and decreases.

Temperature control works by calculating the temperature of the coil based on changes in resistance that occur as a conductor (i.e. your coil) grows hotter. The goal is to keep your coil at this temperature all of the time, therefore adjust the wattage as needed to achieve this.

TC mode is featured in devices, but it’s such a common function that you’d be hard pressed to find a variable wattage mod without it. You should make sure that all of the common TC coil types (nickel, titanium, and stainless steel) are covered, and that you can modify your ramp-up wattage if possible. However, TC is so widely used that most current devices can handle all of your needs.

Temperature control that is intelligent

Intelligent temperature control, which is found on devices. This tries to remove some of the guesswork out of TC vaping. When you attach a temperature control coil, it recognises it and instantly calculates the ideal settings for you; all you have to do now is set the temperature.

It’s not difficult to do this yourself using standard temperature control, but if you’re looking for something extremely simple to use, it’s a nice feature to have on a mod.


Temperature fluctuations have varied effects on different materials. Kanthal, for example, changes resistance very little when it heats up (and hence isn’t appropriate for TC vaping), but other materials, like as nickel, have a lot more obvious reaction and are far more suitable for TC vaping.

The TCR values indicate how strong this reaction is. You won’t need to adjust the TCR in most circumstances because the values for various materials are well-known, and all modifications have an automated setting. It may, however, need to be tweaked from time to time.

Mode: Do-it-yourself

One of the numerous choices on the Vaporesso Luxe II and related Vaporesso devices is “DIY” Mode. This is a little perplexing because “DIY” in this context generally refers to the normal operating modes for most modifications — a tribute to how difficult it is to comprehend mods nowadays!

The gadget also picks a proper wattage for your coil while in DIY Mode in the VW option. Of course, you can modify this manually to fit your tastes, but if you’re new to vaping or have a new tank that you’re not sure how to use, this is a great feature to have.

The fact that the regular modes on the Luxe are supposed to be more user friendly than on conventional devices contributes to the uncertainty regarding the intuitive meaning of this mode (at least among experienced vapers). Consider DIY mode to be a collection of different modes rather than a standalone mode.

Advanced vape modes aren’t as difficult as they appear

The good thing is that, despite the fancy titles given to these modes by firms, they are usually pretty simple in terms of what they do and how they function. You don’t need to know much about them to for them to operate, and most of them run in the background without you having to do anything.

Of course, the vaping market is constantly evolving, so there will be more new things to learn about before you know it. Normally, you can find out about these on the manufacturer’s website, but we’ll keep this article updated when new information becomes available.

However, as long as you master the fundamentals, you’ll be able to quickly learn any new advanced vaping modes.

Leave a Reply

Your email address will not be published. Required fields are marked *